Injection Mould for Thin Wall 2 Liter of Iml Lid (MELEE MOULD -24)

Model NO.: MELEE MOULD -24
Runner: Hot Runner
Design Software: UG
Installation: Fixed
Standard: HASCO
Customized: Customized
Mould Steel: DIN1.2344pretreat45-55HRC
Injection Cycle Time: 5seconds
Specification: SGS
Origin: Huangyan, Taizhou
HS Code: 8480710090

Injection Mould for Thin Wall 2 Liter of Iml Lid (MELEE MOULD -24)
Injection Mould for Thin Wall 2 Liter of Iml Lid (MELEE MOULD -24)
Detail description of Thin wall injection Mould, IML mould/mold. Lid mould/mold.
Plastic Mould die Makers:
IML LID MOULD material: ABS, PP, PE or as per customer requirement.
IML LID mould cavity: As per customer requirement
New Plastic Products size: Depends on your design.
New Plastic Products material: P20, 718...
New Plastic Products life: 800k shots
New Plastic Products Runner system: Cold runner or hor runner
Plastic Mould die Makers features: Good quality
Injection cycle time: 60seconds
Tooling time: 20days

MELEE MOULD Co., Ltd service process for Plastic Mould die Makers
1. Design/sample: Product, mould, etc.

2. Discussion: Mould material, cavity number, price, runner, payment, etc.

3. Order placed: According drawing or your samples.

4. Design mould: We will send mould design to customer for confirmation

5. Mould tooling: We start to make mould after mould design confirmed

6. Mould processing: Send pictures to customer every week for the customer to know the mould processing.

7. Mould shot trial: Send mould shot trial samples to customer to confirm mould quality

8. Delivery: Ship mould after mould quality confirmed.

Working Principle

Chenwei Series Vibration Polishing Machine has a ring chamber to hold media (abrasive stones) and work pieces.When the machine start working,it makes three-D high frequency vibration.This motion makes the media work on surface of work pieces upward &downward;leftward and rightward;frontward and backward.The process is similar to handwork of surface polishing.

The grinding stones are rolling forward and they are grinding each other during .this makes the work pieces ,polished and clean.

To replace the traditional cloth-wheel polishing, the Vibratory Finishing Machine for Metal Working can save a lot of spending on manpower, and lower the cost of production. It can also be matched up with mass production, improve and stabilize the quality of the products.

The machine structure

Vibratory Polish machine is composed of inertial vibrator, vessel, electrical cabinet and basement.

Inertial vibrator: This is the vibrating source of the machine, it is composed Of vibratory motor, springs and eccentric blocks.

Vessel: The vessel is welded of annular steel plate. It is lined with high quality wearable Polyurethane, to weaken the noise and the bump of workpieces on vessel. (For CWP series, there is a separator on the vessel to seperate the workpieces from the stones. )

Electrical cabinet: Operate the machine by buttons on the control panel.

Basement: It is weld of steel, and it has springs to hold the vessel

Car wheel Polishing Machine

Polishing Machine

Polishing Machine,Car Polishing Machine,Wheel or Polishing Machine,Car Alloy Wheel