Stainless Steel Steam Heating Stirring Pot

  • Model NO.: WY-1000
  • Working: High Speed Mixer
  • Application: Liquid with Suspended Solids, Viscous Fluid, Liquid
  • Layout Type: Verticle
  • Additional Capabilities: Milling
  • Condition: New
  • Mixing Speed Option 2: 8-140rpm
  • Speed Option 4: 200-1000rpm
  • Origin: Wenzhou China
  • Mixer Type: Agitator
  • Stirring Type: Spiral
  • Application Area: Metallurgy&Mineral
  • Mixing Drum Shape: Disc
  • Operating type: Cycle Operating
  • Mixing Speed Option 1: Fixed Speed Such 36rpm 60rpm, 110rpm
  • Mixing Seed Option 3: 40-200rpm
  • Specification: CE ISO
Stainless steel steam heating stirring pot
1. Made of stainless steel
2. Mixing milk, juice, or any other viscous liquid
3. Customized mixing tank capacity

Stirring pot mainly made of stainless steel, used for mixing different liquid together.
Also, you can use this mixing tanks to mix liquid and power to make a mixture.
Stirring pots can be with different mixing speed. Such as 36rpm, 60rpm fixed mixing speed. But due to some production reqeust, you may need the mixing tanks with variable speed, such as 8 to 140rpm, 40 to 200rpm mixing speed, or 200 to 1000 rpm mixing speed. In special reqeust, we can use VFD to meet your special mixing speed request.

Wenzhou wanyuan food machinery factory mainly produce stainless steel stirring pots for milk, juice, beverage, cosmetic, detergent as well as chemical product.

Our stirring pot capacity can be 50L, 200L, 500L, 2000L or any other capacity you need.
 volume (L) Dimension
(D× h ) (mm)
Total height (mm)  Diameter Of inlet
& outlet 
Heat preservation layer (mm) 
500 840 × 1000 2250 38 60 
600 920 × 1000 2300 38 60

 
700 990 × 1000 2300 38 60
800 950 × 1220 2500 38 60
900 1010 × 1220 2500 38 60
1000 1060 × 1220 2550 51 60
1500 1160 × 1500 2850 51 60
2000 1340 × 1500 2900 51 60
3000 1410 × 2000 3400 51 60
4000 1620 × 2000 3450 51 60
5000 1810 × 2000 3500 51 60

Screw Chiller is called screw chiller because of its key component-compressor. The unit is made of gas refrigerant from the evaporator; after the compressor is adiabatically compressed, it becomes a high temperature and high pressure state. The compressed gas refrigerant is cooled and condensed in the condenser at equal pressure, and after condensing, it changes into a liquid refrigerant, and then expands to a low pressure through a throttle valve to become a gas-liquid mixture. The liquid refrigerant under low temperature and low pressure absorbs the heat of the material to be cooled in the evaporator and becomes gaseous refrigerant again. The gaseous refrigerant re-enters the compressor through the pipeline and starts a new cycle. The principle flow of screw chiller is divided into air cooling and water cooling.

Screw Chiller

Water Cooled Screw Chiller,Screw Water Chiller,Water Cooled Screw Compressor Chiller,screw top water cooler,screw water cooled liquid chiller,water cooled screw chiller trane,Water cooled flooded screw chiller, Screw type water chiller plant‎

Shenzhen Toyocool Refrigeration Equipment Co.,Ltd. , https://www.toyochiller.com