Plastic crusher classification

The powder in the plastic crusher has high-frequency, high-velocity, high-stress, and high-strain-rate crash characteristics and is a brittle fracture crushing effect. Crush the plastic material of the plastic crusher. When the injection molding machine or the granulator produces raw materials, the defective products and spout produced can be put into the machine-side plastic crusher in time.

Plastic crushers are suitable for the recycling of plastics like boxes, thin tubes, blow molded parts, bottles and shells. The plastic crusher is easy to operate, and the blade change is simple and quick. The flat cutter has a large structure and is suitable for crushing large-volume thin-walled and thin-material products to improve the crushing efficiency. The electronically controlled safety design is adopted. The hopper adopts a double-layer structure and is filled with sound insulation materials. The motor is equipped with an overload protection device and power supply equipment with good safety and environmental protection, saving power and durability.

Plastic crusher is also known as plastic crusher in plastic injection industry. There are three main categories:

(A) Hard plastic crusher, this machine is suitable for crushing all kinds of small and medium plastic plates:

1, ABS, PE, PP board and other plates crush recovery;

2. The rectangular feeding port, which is specially designed for crushing board materials, is convenient for smashing long strips and improving work efficiency. Optional suction fan, storage tanks composed of plate smash recovery system

The system can make full use of recycling efficiency;

3, the use of sealed bearings, so that the bearing rotation for a long time to maintain good; knife-type design is reasonable, uniform product granulation; knife seat heat shrinkable, elegant exterior design;

(b) Power plastic crusher:

1. The knife-type knife structure is between the claw knife and the flat knife and is suitable for crushing plastic products such as ordinary sheets, pipes, profiles, plates and packaging materials;

2. General-purpose plastic crusher uses sealed bearings to keep the bearings rotating for a long time;

3, knife-type design is reasonable, the use of alloy steel blades, uniform product granulation, heat treatment of the knife seat, and after a rigorous balance test, elegant appearance design;

(3) Plastic pipe plastic crusher:

1, suitable for smashing all kinds of small and medium-sized plastic pipe, such as PE, PVC pipe, silicon core pipe crushing recovery;

2. The specially designed round pipe feeding port for the crushing of pipe material is convenient for smashing the long pipe and improving work efficiency. Optional suction fan, storage tank composed of pipe crushing recovery system can give full play to the recycling efficiency;

3, the use of sealed bearings, so that the bearing rotation for a long time to maintain good; knife-type design is reasonable, product granulation evenly; knife seat heat shrinkable, elegant exterior design.

Plastic crusher use:

Applicable to the recovery of plastics like boxes, thin tubes, blow molded parts, bottles, shells, etc. The plastic crusher is easy to operate, and the blade change is simple and quick. The flat cutter has a large structure and is suitable for crushing large-volume thin-walled and thin-material products to improve the crushing efficiency. The electronically controlled safety design is adopted. The hopper adopts a double-layer structure and is filled with sound insulation materials. The motor is equipped with an overload protection device and power supply equipment with good safety and environmental protection, saving power and durability.

The main features of plastic crusher:

This type of machine adopts alloy steel blades for long service life. At the same time, the machine adopts a separate design, which is easy to overhaul and clean. It has a double-layered structure, is equipped with sound insulation materials, has low noise, and the knife shaft seat undergoes a strict balance test. The base is equipped with four wheels and it is easy to move.


Flotation Beneficiation Plant, also named as Flotation Processing Plant, is a ore concentrating process that separates the ore from its gangues with the help of chemicals. This difference of the solution among the other processes is the Mineral Separator , namely flotation cell( Flotation Machine).after adding chemicals into the slurry, there are plenty of bubbles appeared, and the ore will stay on the surface of the bubbles, the scraper on the flotation machine collect the bubbles at the surface, thus the ore is separated, and after concentrating, the finished concentrate is produced.  The flotation mineral ore processing plant can be used for various kinds of ores, such as, gold ore, lead ore, zinc ore, graphite ore, copper ore, nickel ore and so on, the flotation Ore Dressing Plant needs to work with some chemicals to concentrate the ore.



Flotation Mineral Processing Plant

Flotation Processing Plant

Flotation Processing Plant,Flotation Plant,Flotation Machine,Flotation Process

Henan Mingyuan Heavy Industrial Machinery Company Co., LTD. , http://www.heavyequipmentchina.com