Investment Demand for Industrial Wastewater Treatment from 2011 to 2015 will reach 129 billion yuan

Drying equipment

According to the latest research data released by China Water Network on "China's Water Market Research Report (2012 Edition) - China's Water Industry Policy and Market Analysis" (hereinafter referred to as the "Report"), during the "12th Five-Year Plan" period, industrial wastewater treatment Investment demand will exceed 120 billion.

During the “Twelfth Five-Year Plan” period, industrial wastewater treatment has become an area of ​​concern in the treatment of water pollution. According to data from the National Bureau of Statistics, the total industrial wastewater discharge in 2010 was 23.747 billion tons, accounting for 38.47% of the total national wastewater discharge. . The compliance rate of industrial wastewater discharge was 95.3%, which was 4.1% higher than that in 2005. From the perspective of emission standards, not only conventional pollutants are faced with further reductions, but the total amount of ammonia nitrogen is also on the agenda.

With the continuous development of China's industrialization and urbanization level, the industrial wastewater will continue to be treated, and the water quality discharge standards will also become more and more stringent, and the environmental protection supervision policy will be further strengthened. In this context, the demand for investment in the industrial wastewater treatment market will further increase.

According to the analysis of the "Report," during the "11th Five-Year Plan" period, the total investment for industrial wastewater treatment in the country reached 82.1 billion yuan, accounting for about 3.8% of the country's total investment in environmental pollution control. According to the “Twelfth Five-Year Plan” environmental protection plan, the total environmental protection investment demand during the “Twelfth Five-Year Plan” period is about 3.4 trillion yuan. If the same proportion is estimated, the investment demand in the national industrial wastewater treatment sector will reach 129 billion yuan from 2011 to 2015. yuan.

Cycloidal gear reducer is a principle adopted K-H-V Planetary Gear less innovative gear. Its transmission process as follows : input shaft equipped with a 180-degree dislocation of the double eccentric sets, replaced with two eccentric turn as a roller bearing arm, the formation of H-, two cycloid round hole at the center shall uplink Eccentric Roller Bearings arm, which cycloidal gear needle round and meshing phase, comprising a difference of the teeth meshing with the gearbox.

Gear Reducer Frame JB

Gear Reducer Frame JB, Portable Gear Reducer Frame, Gear Speed Reducer Frame

JiangYin JiaYou Reducer Co., Ltd. , http://www.general-reducer.com